NetComm NTC-220 User Manual page 28

Signal strength (dBm)
Frequency
Coverage
Roaming status
WWAN connection status
Profile name
Status
Default profile
WWAN IP
DNS server
APN
Connection uptime
Show data usage button
Ethernet WAN connection status
No.
Name
Status
IP address
Netmask
Gateway
WLAN AP status
No.
Status
Network Name (SSID)
Channel
Network authentication
Station info
WLAN client connection status
Remote SSID
NTC-220 – User Guide
UG01028 v1.2 March 2019
I T E M
The current signal strength measured in dBm
Displays the band and frequency currently in use.
The type of mobile coverage being received by the
router.
The roaming status of the router.
The name of the active profile.
The connection status of the active profile.
Indicates whether the current profile in use is the default
profile.
The IP address assigned by the mobile broadband carrier
network.
The primary and secondary DNS servers for the WWAN
connection.
The Access Point Name currently in use.
The length of time of the current mobile connection
session.
Click to enlarge the status box to display the amount in
bytes of Data received, Data sent and Total data usage.
For each session you can also Show duration or Show
end time.
The index number of the WAN interface.
The device name as it is known on the system.
Displays whether the interface is up or down.
The IP address assigned to the Ethernet interface.
The Netmask address assigned to the Ethernet interface.
The Gateway address assigned to the Ethernet interface.
The index number of the SSID profile.
Displays whether the profile is enabled or disabled.
The network name (SSID) that clients use to identify the
access point.
The wireless channel that the access point operates on.
The type of security on the wireless network.
Click the Station info link to display information about
connected clients.
Shows the network name (SSID) of the wireless network.
D E F I N I T I O N
© NetComm Wireless 2019
28 of 193