NetComm NTC-220 User Manual page 119

To add a new destination profile:
1 Click the +Add button at the top right corner of the window. The Event destination profile edit screen is
displayed.
2 In the Destination name field enter a name for the destination profile.
3 Then for each destination enter the contact details relevant to that destination type i.e.: Email address, TCP
address and port, UDP address and port and/or SMS number.
4 In addition to entering details for specific destination types, you can also add a custom command to perform
certain tasks when an event is triggered. Any command or script that can be executed from a terminal
command prompt, including any executable and parameters, can be entered in the Custom Command field.
5 Click the Save button when you have entered the required details.
To edit a destination profile:
1 From the Event destination list, click the edit button for the corresponding destination profile. The Event
destination edit page is displayed. Make the required changes.
2 Click the Save button.
To delete a destination profile:
1 From the Event destination list, select the delete button for the corresponding destination profile that you
would like to delete. If the destination profile is linked to an event notification type, the i button is displayed
instead of the delete button. In this case, you must go to the Notification configuration screen and remove
the check marks from all the notification types for each event for which the destination profile is configured.
When you have done that, return to the Event destination list and select the delete button.
2 Click the Save button.
NTC-220 – User Guide
UG01028 v1.2 March 2019
119 of 193
© NetComm Wireless 2019