Wake Settings - NetComm NTC-220 User Manual

Wake settings

Use the Wake mode drop-down list to select a condition under which the router should return from the sleep state.
Wake triggered by ignition pin
This mode sets the router to wake up when the signal on the ignition pin reaches the specified value.
Use the Wake up when ignition pin goes setting to select Low or High. By default, this is set to High.
Wake up at scheduled time
When this mode is selected, the router wakes up at the time specified in the Schedule wake up at field, regardless
of the state of the ignition pin. Enter the time in 24-hour format without the semi-colon.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 155 – Wake up triggered by ignition pin
Figure 156 – Wake up at scheduled time
165 of 193
© NetComm Wireless 2019