7.
Raise the rear of the guide.
8.
Remove the guide while keeping clear of the half punches inside the
side plate.
u NOTE u
Remove the guide carefully not to allow the guide to tilt laterally. If the guide is
tilted, it might get caught with the side plate and cannot be removed.
011-202-08E
09.30.2009 FM5540
9.
Carry out the operations in the steps 10 and 11 from the direction
indicated by the arrow in the figure below.
10.
Remove the screws.
11.
Remove the screws.
CR-IR 363 Service Manual
PM-93
PM-93