FujiFilm PROFECT CS Service Manual page 1299

8.
Insert the tip of the guide between the rods of the rubber rollers, and
lead the tip of the guide onto the half punch in the side plate.
011-202-08E
09.30.2009 FM5540
9.
Carry out the operations in the step 10 from the direction indicated by
the arrow in the figure below.
10.
Check to ensure that the tip of the guide is mounted on the half punch.
u NOTE u
If the tip of the guide is not mounted on the half punch in the side plate, it might
cause the IP to get jammed.
CR-IR 363 Service Manual
PM-98
PM-98