12.
Carry out the operations in the steps 13 to 16 from the direction
indicated by the arrow in the figure below.
13.
Raise the rear of the guide and move it backward.
u NOTE u
Move the guide backward carefully not to allow the guide to tilt laterally. If the
guide is tilted, it might get caught with the side plate and cannot be removed.
011-202-08E
09.30.2009 FM5540
14.
Remove the guide while keeping clear of the half punches inside the
side plate.
u NOTE u
Remove the guide carefully not to allow the guide to tilt laterally. If the guide is
tilted, it might get caught with the side plate and cannot be removed.
CR-IR 363 Service Manual
PM-94
PM-94