Project Setting Example - ICP DAS USA UA-5200 Series User Manual

UA-5200 Series User Manual V4.3 ICP DAS

2.3. Project Setting Example

The screen view after login the UA-5200 Web UI (Web User Interface) is as the following
picture. Then can start to setup the UA series controller.
If your UA-5200 controller has not connected to the Web UI, please refer to Section 2.1
Hardware Connection and Section 2.2 Network Connection.
This section will introduce a quick setup method to complete a simple project example to
allow users to learn about the project setting flow and steps.
The quick setup method is to use the [ Function Wizard ] that at the up-right corner of the
Web UI since Version V2.0.0. The Function Wizard provides several items for quick setting
the projects or functions step by step like the Wizard guide. The users just follow the "step
box" and then can complete the project quickly and well. For more detail information of the
Function Wizard, please refer to Chapter 4.
The user can also select the main menu function of the Web UI to setup the project. The
complete detail description of the menu functions, please see Chapter 5 ~ Chapter 11.
24