ICP DAS USA UA-5200 Series User Manual page 29

UA-5200 Series User Manual V4.3 ICP DAS
In this example, the M-7055D has DO and 8 DI channels, please create the table as
following pictures of the [Modbus Mapping Table Setting]. After complete the setting,
the DO and DI Modbus address settings will show in the [Modbus Mapping Table].
M-7055D 8 DO setting and the [Coil Status(0x)] table after setting are as below:
DO mapping 01
UA start address: 0
DO x 8
Click [Add]
M-7055D 8 DI setting and the [Input Status(1x)] table after setting are as below:
DI mapping 02
UA start address: 0
DI x 8
Click [Add]
After setting, the Modbus Mapping table is showing as below. Click [OK] to save and
exit.
For more setting item description, please refer to chapter 6. Module Setting.
29