3. Configuration and Operation with Web Browser
The M2M-710D module is built-in web server, the user can configure and operate the M2M-
710D by web browser (ex: IE).
3.1 Connection Setting
Before you open the web browser to configure the module, it needs to connect the M2M-710D
and your PC in the same sub network or same Ethernet Switch (as shown in figure 7) and set
network settings (such as IP/Mask/Gateway) of the PC. The example of connection setting will
be described below and Microsoft Windows XP Professional SP2 is used.
Connection steps:
Step 1: Open Network Connections
1.Click "start->Settings->Network Connections"
M2M-710D User Manual (Version 1.00, Mar/2009)
Figure 10 connection architecture
Figure 11 click "start->Settings->Network Connections"
PAGE:15