ICP DAS USA UA-5200 Series User Manual page 143

Module Setting > Modbus - RTU Module (Master) > Modbus RTU Module List
LAN
No.
*Module Name /
Nickname
Edit
Copy
Remove
Remove all
Save
Click [Edit] can enter the [Module Content Setting] page to set up the module and the
Modbus address mapping table.
Choose the LAN port of UA controller that links with the TCP module.
UA-52xx has one LAN port; the coming UA-2xxx has 2 LAN ports.
Click to add a list of module.
Check the box in the left of the module is to select that module list,
can delete or copy the module.
Check the box "Select All" will select all modules in the list.
The module number in the module list (System arrange, not editable)
Module name or nick name. User can give a new name.
(The star * means this field cannot be null.)
Click to set the module in the Module Content Setting page.
Select the module wants to copy by
check the box and click [Copy] can copy
module by assigning port and quantity.
Yes: copy the module and exit.
No: exit without copy.
Click to delete the checked module(s)
Click to delete all modules linked with
the selected port.
Remove: delete the modules and exit.
No: exit without delete module.
The page number / total pages of the module list. Click < or > to go to
the previous or the next page.
Click to save the settings of this page.
UA-5200 Series User Manual V4.3
143
ICP DAS