ICP DAS USA UA-5200 Series User Manual page 97

Step 3. Apply Connection & Enable Converting Module
Click the next step, and enter the Step 3 [Apply Connection & Enable Converting
Module] UI setting. This page is for applying the connection and enabling the
converting module.
We select the "Modbus TCP / Azure" at the beginning, and UA system connecting to
Azure through MQTT JSON group method, so this step will auto enter the [Convert
Setting > MQTT JSON - Modbus TCP (Master)] page of Convert setting. The "Step
Box" will prevent the user from selecting the wrong platform.
Convert Setting > MQTT JSON > Modbus TCP (Master) Module List
No.
*Module Name /
Nickname
Edit
Connection Name
All Enabled
Save
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
If user wants to enable some I/O channels for conversion,
click [Edit] of that module to enter the "Variable Tale" setting.
Select an Azure connection name, and then click [Apply].
Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck. Check the box of each module
can enable just that module for conversion.
The page number of the module list: Current page / Total
pages. Click < or > to go to the previous or next page.
Click to save the settings of this page.
97
UA-5200 Series User Manual V4.3 ICP DAS