ICP DAS USA UA-5200 Series User Manual page 31

UA-5200 Series User Manual V4.3 ICP DAS
Step 4. Enable Converting Module
Click the next step, and enter the Step 4 [Enable Converting Module] UI setting
This step is for enabling the Modbus RTU / OPC UA conversion.
We select the "Modbus RTU / OPC UA" conversion at the beginning, so this step will
auto enter the [OPC UA > Modbus RTU (Master)] page of Conversion setting. The
"Step Box" will prevent the user from selecting the wrong platform.
<This Example>
In this setting page, please check the enable box of the module M-7055D we set up in
the previous steps. And click [Save] button.
The above action will enable all I/O channels of the M-7055D for communication
conversion. If users need to enable some channels only, please click [Edit] to enable
individual channels. (Refer to Chapter 8)
1
2.
Check the box
31