ICP DAS USA UA-5200 Series User Manual page 173

The "Module Content Setting" page after clicking the [Edit] button:
Convert Setting > OPC UA > Modbus RTU (Master) – Module Content
No.
Module Name
Convert Setting > OPC UA > Modbus RTU (Master) – Variable Table
Name
Attribute
Data Type
Enabled
OK
When complete the setting, click [OK] to save this page settings and back to the module list
page. And remember to click [Save] to save the Convert Setting.
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Display the variable name that set in the Modbus Address Mapping
Table page (Not editable here)
Display data attribute of the variable. (Not editable)
Include: Read, Read/Write...
Display data type of the variable that set in the Modbus Address
Mapping Table page. (Not editable) Include: Bool, Short, Float...
Check [Enabled] box of the top row can enable all variables in list.
Check the box of each variable can enable just that variable for
conversion. Default: Uncheck.
Click to save this page settings and back to the module list page.
UA-5200 Series User Manual V4.3
173
ICP DAS