ICP DAS USA UA-5200 Series User Manual page 47

Step 4. Enable Converting Module
Click the next step, and enter the Step 4 [Enable Converting Module] UI setting
This step is for enabling the Modbus RTU (or ASCII) / OPC UA conversion.
We select the "Modbus RTU (or ASCII) / OPC UA" conversion at the beginning, so this
step will auto enter the [OPC UA > Modbus RTU/ASCII (Master)] page of Conversion
setting. The "Step Box" will prevent the user from selecting the wrong platform.
Convert Setting > OPC UA > Modbus RTU (Master) Module List
No.
*Module Name
/ Nickname
All Enabled
Edit
Save
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck.
Check the box of each module can enable just that module for
conversion.
If user wants to enable some I/O channels for conversion, click
[Edit] of that module to enter the "Variable Tale" setting. It is
normal to set all channels as enabled, and the conversion will not
affect the unconnected channels.
The page number of the module list: Current page / Total pages.
Click < or > to go to the previous or next page.
Click to save the settings of this page.
UA-5200 Series User Manual V4.3
47
ICP DAS