ICP DAS USA UA-5200 Series User Manual page 85

Step 5. Apply Connection & Enable Converting Module
Click the next step, and enter the Step 5 [Apply Connection & Enable Converting
Module] UI setting. This page is for applying the connection and enabling the
converting module.
We select the "Modbus RTU (or ASCII) / MQTT JSON" conversion at the beginning, so
this step will auto enter the [Convert Setting > MQTT JSON - Modbus RTU (or ASCII)
(Master)] page of Convert setting. The "Step Box" will prevent the user from selecting
the wrong platform.
Convert Setting > MQTT JSON > Modbus RTU (Master) Module List
No.
*Module Name
Connection
Name
All Enabled
Edit
Save
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Select a group connection name, and then click [Apply].
Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck. Check the box of each module
can enable just that module for conversion.
If user wants to enable some I/O channels for conversion, click
[Edit] of that module to enter the "Variable Tale" setting.
The page number of the module list: Current page / Total pages.
Click < or > to go to the previous or next page.
Click to save the settings of this page.
UA-5200 Series User Manual V4.3
85
ICP DAS