Function Wizard - ICP DAS USA UA-5200 Series User Manual

UA-5200 Series User Manual V4.3 ICP DAS

4. Function Wizard

[Function Wizard] at the up-right corner of the Web UI since the version V2.0.0 provides a
quick setting "Step Box" suitable for new users to set up the projects or functions.
[Step Box] (As below picture) is a Wizard-like step guide. When the user selects a function
item of the Function Wizard, the Web UI will enable a Wizard mode and show a "Step Box".
The user just needs to follow the "Step Box" step by step and then can complete the project
or function quickly and rightly.
This chapter will focus on the steps
and function settings. About the real
4.1
module using, refer to Section 2.3.1 ,
there is a project using M-7055D and
UA-5231, and converting Modbus
RTU with OPC UA protocol. The user
could see that chapter and this
chapter to know more procedure
4.2
concept and setting tips.
4.3
Function Wizard will develop more
functions or projects, but now there
are 16 items in 4 major categories,
4.4
this chapter will introduce them in
three sections.
37