Click [Edit] button cauld enter the "Module Content Setting" page:
Convert Setting > OPC UA > MQTT – Module Content Setting
No.
Module Name
Convert Setting > OPC UA > MQTT – Variable Table
Name
Attribute
Data Type
Enabled
OK / Cancel
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Display the variable name that set in the MQTT Module List (Not
editable here)
Display data attribute of the variable. (Not editable)
Include: Read, Read/Write...
Display data type of the variable that set in the Modbus List. (Not
editable) Include: Bool, Short, Float...
Check [Enabled] box of the top row can enable all variables in
list. Check the box of each variable can enable just that variable
for conversion. Default: Uncheck.
Click [OK] to save and exit the page settings.
Click [Cancer] to exit without saving.
UA-5200 Series User Manual V4.3
59
ICP DAS