ICP DAS USA UA-5200 Series User Manual page 70

Click [Edit] button cauld enter the "MQTT Client Setting" page:
Convert Setting > MQTT > Modbus TCP (Master) – MQTT Client Setting
No.
Module Name
Scan Rate(ms) Set an update frequency for the task data. Default: 1000 (Unit: ms)
Dead Bend
Will Topic
Will
MQTT
Connection
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Give a dead bend value for updating a float signal. Default: 0
Enter the title of a disconnect notice. Default: Null.
Enter a disconnect notice. Default: Null.
Check the Broker want to use Local Broker or Remote Broker.
UA-5200 Series User Manual V4.3
70
ICP DAS