Set Up The Driver; Example Of The Modbus Driver Settings - ICP DAS USA UA-5000 series User Manual

UA-5000 Series User Manual V.1.0.0 ICP DAS

2.4.1. Set up the Driver

The Driver setting is divided into the Modbus Driver setting and the MQTT Driver setting.

2.4.1.1. Example of the Modbus Driver settings

In this example, we use Modbus TCP protocol to conduct the Modbus Driver setting. The user can
also refer the Chapter 3 - System Function Description - Section 3.3 Driver to view all features,
properties and configuration notice for each item mentioned in this section.
Step 1
Add all needed variables in the variable table. (See Section 2.2)
Step 2
On the tree menu to the left, click "Driver > Modbus Master > TCP", and add a connection task.
1
2
20