ICP DAS USA UA-5200 Series User Manual page 82

Step 4. MQTT Group Setting
Click the next step, and enter the Step 4 [MQTT Group Setting] of the UI setting.
This page is for setting the MQTT Group connection, Setting with the MQTT JSON
function in the Convert Transmission, It can make the I/O module messages in groups
and then mapping to the user-defined publish and subscribe topics.
We select the "Modbus RTU (or ASCII) / MQTT JSON" conversion at the beginning, so
this step will auto enter the [MQTT Connection > MQTT Group Connection] page of
IoT Platform Setting. The "Step Box" will prevent the user from selecting the wrong
platform.
MQTT Connection > MQTT Group Connection > MQTT Connection Group Name List
Group Name
Save
After creating a new group (as below):
MQTT group name, user can define, e.g. Group1. Default: Name.
Click to add a new MQTT Group.
The page number of the group list: Current page / Total pages.
Click < or > to go to the previous or next page.
Click to save the setting of this page.
UA-5200 Series User Manual V4.3
82
ICP DAS