ICP DAS USA UA-5200 Series User Manual page 48

Click [Edit] button cauld enter the "Module Content Setting" page:
Convert Setting > OPC UA > Modbus RTU (Master) – Module Content
No.
Module Name
Convert Setting > OPC UA > Modbus RTU (Master) – Variable Table
Name
Attribute
Data Type
Enabled
OK
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Display the variable name that set in the Modbus Address
Mapping Table page (Not editable here)
Display data attribute of the variable. (Not editable)
Include: Read, Read/Write...
Display data type of the variable that set in the Modbus Address
Mapping Table page. (Not editable) Include: Bool, Short, Float...
Check [Enabled] box of the top row can enable all variables in
list. Check the box of each variable can enable just that variable
for conversion. Default: Uncheck.
Click to save this page settings and back to the module list page.
UA-5200 Series User Manual V4.3
48
ICP DAS