ICP DAS USA UA-5200 Series User Manual page 118

Step 3. IFTTT Condition Trigger
Click the next step, and enter the Step 3 [IFTTT Condition Trigger ].
This page is for the APP message related setting, e.g. IFTTT event name, key, trigger
condition, I/O variables ....
We select the "IFTTT Condition Trigger (Line, Facebook, Twitter)" at the beginning,
so this step will auto enter the setting page [Advanced Setting > IFTTT Condition
Trigger]. The "Step Box" will prevent the user from selecting the wrong platform.
Advanced Setting > IFTTT Condition Trigger > FTTT Condition Trigger List
Add Message Click to add a new IFTTT message. After setting, an IFTTT condition
Event Name
Key
Edit
Status
Remove
Save
Click [Add Message] botton to enter the IFTTT [Content Settings] page:
trigger list will show on the bottom, includes left box, event name,
key and status.
Check the box in the left of the list is to select and to delete the list.
Check the box on the top will select all lists.
Display the "Event Name" setting in the IFTTT website.
Display the "Key" getting from the IFTTT website.
Click [Edit] can set the IFTTT condition trigger content.
Display the enable status of the IFTTT condition trigger list.
Click the left box and [remove] can delete the IFTTT list.
The page number of the IFTTT list: Current page / Total pages. Click
< or > to go to the previous or next page.
Click to save the setting of this page.
UA-5200 Series User Manual V4.3
118
ICP DAS
(Append. C)
(Append. C)