ICP DAS USA UA-5200 Series User Manual page 141

Modbus Mapping Table – Nickname Setting
Modbus Mapping
Table
Table Display
Address
Variable name
Data Type
Swap
Description
OK
Coil Status(0x): Mapping to DO Modbus address
Input Status(1x): Mapping to DI Modbus address
Holding Registers(4x): Mapping to AO Modbus address
Input Registers(3x): Mapping to AI Modbus address
Click [Show] to display all fields, click [Hide] to hide some fields.
Modbus address. System auto arrange.
The variable name of the mapping address. Default: Tag0 and auto
arrange the number. User can define the name.
Display data type of the variable. (Not editable)
Check to swap the byte order (Lo-Hi/Hi-Lo) for 4-byte or 8-byte.
Write a note for this variable.
Click to save this page settings and back to the module list page.
UA-5200 Series User Manual V4.3
141
ICP DAS