ICP DAS USA UA-5200 Series User Manual page 107

Step 3. PID Operation
Click the next step, and enter the Step 3 [PID Operation] of the UI setting.
This page is for setting the Task and related parameters of the PID Operation, e.g. I/O
module, I/O channels, variables, set point, control mode ....
We select the "PID Operation" at the beginning, so this step will auto enter the setting
page [Advanced Setting > PID Operation]. The "Step Box" will prevent the user from
selecting the wrong platform.
Advanced Setting > PID Operation > PID List
PID Name
Edit / Remove
Save
Click [Edit] botton to enter the [Content Settings] page:
Advanced Setting > PID Operation > Content Settings
PID Name
PID name, user can define, e.g. Task1. Default: Task.
Click to add a new PID Task.
Click [Edit] can set the PID content.
Click the left box and [remove] can delete the PID list.
The page number of the PID list: Current page / Total pages. Click
< or > to go to the previous or next page.
Click to save the setting of this page.
PID name, user can define, e.g. Task1. Default: Task.
UA-5200 Series User Manual V4.3
107
ICP DAS