ICP DAS USA UA-5200 Series User Manual page 109

Advanced Setting > PID Operation > Output Item
Module Choose a predefined module for output data of the PID. Select the type,
selection number and name of the input module. If no option is available, add a
new module.
Variable Choose a predefined float variable as the output parameter for PID
selection operation. Select the attribute, type and name of the float variable.
Max Set the upper-limit value for the variable. Default: 0.
Min Set the lower-limit value for the variable. Default: 0.
OK Click to save the settings of the page and back to the PID list page.
Example:
UA-5200 Series User Manual V4.3
109
ICP DAS