ICP DAS USA UA-5200 Series User Manual page 75

This page allows display and set the COM port interface of the controller for the
RS-232/RS-485 serial communication.
The user can find the default communication values of our I/O modules from the
module CD, manual or
COM Port Interface Setting Page
Serial Port
Baud Rate
Data Bits
Parity
Stop Bits
Polling Rate(ms)
Save
I/O Module website.
Choose the serial port of UA controller that links with the I/O
module. ttyO2: RS-485 ; ttyO4: RS-232 ; ttyO5: RS-485
Choose a baud rate to communicate with the module: 1200,
2400, 4800, 9600, 19200, 38400, 57600 and 115200. The UA
controller and the I/O module need have the same baud rate.
The number of bits used to represent one byte of data: 7 bits or
8 bits. Default: 8 Bits.
Choose one way for the parity checking.
Options: None, Even, and Odd. Default: None.
Choose the number of stop bit: 1 bit or 2 bits. Default: 1.
Set a time interval for the command. Default: 500 ms
Click [Save] button could save the settings of this page.
75
UA-5200 Series User Manual V4.3 ICP DAS