ICP DAS USA UA-5200 Series User Manual page 202

Advanced Setting > IFTTT Condition Trigger > FTTT Condition Trigger List
Add Message Click to add a new IFTTT message. After setting, an IFTTT condition
trigger list will show on the bottom, includes left box, event name, key
and status.
Check the box in the left of the list is to select and to delete the list.
Check the box on the top will select all lists.
Display the "Event Name" setting in the IFTTT website.
Event Name
Display the "Key" getting from the IFTTT website.
Key
Edit Click [Edit] can set the IFTTT condition trigger content.
Status Display the enable status of the IFTTT condition trigger list.
Remove Click the left box and [remove] can delete the IFTTT list.
The page number of the IFTTT list: Current page / Total pages. Click < or
> to go to the previous or next page.
Save Click to save the setting of this page.
Click [Add Message] botton to enter the IFTTT [Content Settings] page:
Note: The "Event Name" and "Key" are set in the IFTTT website. If you are not
with IFTTT, p
lease see the
Advanced Setting > IFTTT Condition Trigger > Content Setting
Input the "Event Name" setting in the IFTTT website.
Event Name
Input the "Key" getting from the IFTTT website.
Key
Status Check to enable the IFTTT condition trigger event.
Appendix C for the setting introductions.
202
UA-5200 Series User Manual V4.3
(Append.
(Append.
ICP DAS
(Append. C)
C)
familiar
(Append. C)
C)