ICP DAS USA UA-5200 Series User Manual page 51

UA-5200 Series User Manual V4.3 ICP DAS

Convert Setting: MQTT and OPC UA
Convert Setting: MQTT and OPC UA
UA Series
MQTT
Controller
Module
(DL-302)
LAN: Ethernet Port
Ethernet
Ethernet Port
Note: The hardware/network connection methods please see the Chapter 2 .
When UA series controller connects the MQTT module (via Ethernet, as DL-302 in the
picture) and through the OPC UA server to read/write the I/O data of the MQTT module,
user can choose the item [MQTT / OPC UA] of the "Module Communication Conversion" in
the Function Wizard.
[Step Box]:
The Step Box of the [MQTT / OPC UA] has 6 steps as below. When enabling the Step Box,
it auto enters the first step setting page (The step with a bold underline means it is the
current step.). The user just needs to follow the "Step Box" step by step and then can
complete the project quickly and rightly.
51