Appendix C. Ifttt Website Setting - ICP DAS USA UA-5200 Series User Manual

Appendix C. IFTTT Website Setting

UA Function combines the IFTTT cloud platform. When the special events occur, it will
trigger the IFTTT and send the message to the IFTTT-related cloud services (such as Line,
Facebook, Twitter, etc.)
The settings for sending the message to the APP with the "IFTTT Condition Trigger (Line,
Facebook, Twitter)" function includes two parts:
1. UA Web Interface Setting: (Refer to
In the UA Web HMI, set up the UA controller, modules, IFTTT trigger conditions, the
condition variable table, and the IFTTT event connection.
2. IFTTT Cloud Platform Setting: (Introduced in this Appendix C)
In the IFTTT website, set up the "if" side service and event (this: use webhooks for the
UA), the "then" side service and action (that: user can select the service, such as the
Line, Facebook, twitter, etc.). And then fill the "Event Name" and "Key" getting from the
IFTTT website setting into the "Content Setting" of the UA We HMI.
This Appendix C introduces the IFTTT website setting for the second part. After complete
the setting, the user will set up an "Event Name" and get a "Key", please input them to the
IFTTT Condition Trigger setting page in the UA Web HMI setting.
This IFTTT setting example will send a message to the APP Line service. IFTTT
provides hundreds of Web or APP services (Ex: Line, Facebook, Twitter, Gmail...). The
setting is in a similar way. Users can follow the steps below for Line to set up own APP.
UA-5200 Series User Manual V4.3
Ex:
Advanced Setting > IFTTT ...)
Section 9.2
216
ICP DAS