ICP DAS USA UA-5200 Series User Manual page 196

UA-5200 Series User Manual V4.3 ICP DAS
PID Operation Solution Example:
In the PID Operation function, UA controller collects the module's data to operate via the
feedback loop component of PID control. The controller compares the collected data with a
reference value and then uses this difference to calculate a new input value whose
purpose is to allow the system data to reach or remain at the reference value.
The setting steps of the PID Operation are as below. The descriptions for the steps setting
please refer to Section 4.3 "PID" items in the Function Wizard.
[Step Box] of [PID Operation] :
[Step Box] of [PID Operation + OPC UA Conversion] :
This section will introduce the function items and setting parameters of the PID Operation.
196