6. Module Setting
Module Setting is the second item of the Main Menu. The Module Setting provides the
functions for UA series controller to connect the remote Modbus Slave module (including
the Modbus RTU/TCP/ASCII module) and the remote MQTT module.
[Module Setting] includes three sub-menu functions (see the picture below) and the
function descriptions are listed on the page of the Main Menu, such as the Modbus RTU
Module (Master), TCP Module (Master), ASCII Module (Master) and MQTT Module. The
Module Setting will support more modules in the future. This chapter will introduce the
current function items and setting parameters.
The setting procedure for the UA series controllers is to set up from the left to the right of
the main menu functions. User can find the procedure information in the following chapters.
3.3 Function Setting Procedure
2. Quick Start
4. Function Wizard
About the Web UI login information and the UI environment, please refer to
Login and Enviroment
Overview.
UA-5200 Series User Manual V4.3
136
ICP DAS
3. Web UI