ICP DAS USA UA-5200 Series User Manual page 113

Step 1. Controller COM Port Setting
This page allows display and set the COM port interface of the controller for the serial
communication. The user can find the default communication values of our I/O
modules from the module CD, manual or
COM Port Interface Setting Page
Serial Port
Baud Rate
Data Bits
Parity
Stop Bits
Polling Rate(ms)
Save
Choose the serial port of UA controller that links with the I/O
module. ttyO2: RS-485 ; ttyO4: RS-232 ; ttyO5: RS-485
Choose a baud rate to communicate with the module: 1200,
2400, 4800, 9600, 19200, 38400, 57600 and 115200. The UA
controller and the I/O module need have the same baud rate.
The number of bits used to represent one byte of data: 7 bits
or 8 bits. Default: 8 Bits.
Choose one way for the parity checking.
Options: None, Even, and Odd. Default: None.
Choose the number of stop bit: 1 bit or 2 bits. Default: 1.
Set a time interval for the command. Default: 500 ms
Click [Save] button could save the settings of this page.
113
UA-5200 Series User Manual V4.3
I/O Module website.
ICP DAS