When entering the menu [Convert Setting] and the sub-menu [OPC UA] > Modbus RTU
(Master) or Modbus ASCII (Master), the Modbus RTU/ASCII modules preset in the [Module
Setting] will show up in the Module List. (Refer to Chapter 6 for the Module Setting.)
Convert Setting > MQTT > Modbus TCP (Master) Module List
No.
*Module Name
/ Nickname
All Enabled
Edit
Save
Click [Edit] button cauld enter the "Module Content Setting" page:
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Check [All Enabled] box to enable all modules in list for conversion.
Default: Uncheck.
Check the box of each module can enable just that module for
conversion.
Click to enter the "MQTT Client Setting" page to set up the Topic,
QoS, Publish, Subscribe ...
The page number of the module list: Current page / Total pages. Click
< or > to go to the previous or next page.
Click to save the settings of this page.
UA-5200 Series User Manual V4.3
175
ICP DAS