ICP DAS USA UA-5200 Series User Manual page 206

Please refer to the previous Condition Trigger Descriptions to set up your Condition.
When complete, click the "Add" button. The setting will show in the Condition Table.
Below Table is setting 2 conditions.
Advanced Setting > IFTTT Condition Trigger > Condition Table
Module Display the module type and name of the condition. (Not editable here)
Variable Display the variable attribute and name of the condition. (Not editable
here)
Condition Display the trigger condition. (Not editable here)
Define Default Message: module code_variable code. The user can define own
Message message in the format of English character, number, general symbol...
Remove Click the left box and [remove] can delete the IFTTT list.
OK Click to save this page settings and back to the module list page.
Cancel Click to exit without saving and back to the module list page.
When back to the IFTTT Condition Trigger List, the condition trigger message will show
as below picture. If need more trigger conditions, click the "Add Message" again to
combine the IFTTT APP message sending and the UA system. At last, click the Save
button.
UA-5200 Series User Manual V4.3
206
ICP DAS