Click [Edit] button cauld enter the "Module Content Setting" page:
Convert Setting > MQTT JSON > Modbus TCP (Master) Module List –Module Content
Setting
No.
Module Name
Convert Setting > MQTT JSON > Modbus TCP (Master) Module List – Variable Table
Details
Variable Name
Alias
Attribute
Data Type
Connection
Name
Enabled
OK
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Click [Show] to display all fields, click [Hide] to hide some fields.
The variable name of the mapping address. (Not editable here)
The alias name for the variable. (Editable here)
Display data attribute of the variable. (Not editable)
Include: Read, Read/Write...
Display data type of the variable that set in the Modbus Address
Mapping Table page. (Not editable) Include: Bool, Short, Float...
Select the Azure connection name that set in the [Azure Setting]
step.
Check [Enabled] box of the top row can enable all variables in list.
Check the box of each variable can enable just that variable for
conversion. Default: Uncheck.
Click to save this page settings and back to the module list page.
UA-5200 Series User Manual V4.3
98
ICP DAS