Setting Up The Pds-220Fx Module - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

4. Setting up the PDS-220Fx Module

Step 1: Connect the PDS-220Fx to the Ethernet Network
Before connecting the PDS-220Fx module to a fiber optic network, the following items are
needed:
1: Power Supply: 12 ~ 48 V
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
2: Fiber to Ethernet (eg: NS-200AFT)
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
3: Ethernet Hub (eg: NS-208)
http://www.icpdas.com.tw/product/solutions/industrial_ethernet_switch/ns-208.html
4: The network settings in the PC are correctly configured and the Ethernet connection is
functioning normally.
5: Disable or correctly configure the Windows firewall and any Anti-Virus software firewall
first or else the "Search Servers" function in the VxComm Utility may not work. (Contact
your System Administrator for more details of how to do this.)
6: Connect the PDS-220Fx module to the fiber optic as shown on the following page and
switch on the power.
7: Make sure the indicator LED of PDS-220Fx modules flashing.
8: Install VxComm Utility on your PC
The software is located at：
CD: \Napdos\Driver\VxComm_Driver\
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
(eg: DP-665)
DC
22