UA-5200 Series User Manual V4.3
ICP DAS
4.3.1.
PID Operation
In the PID Operation function, UA controller collects the module's data to operate via the
feedback loop component of PID control. The controller compares the collected data with a
reference value and then uses this difference to calculate a new input value whose
purpose is to allow the system data to reach or remain at the reference value. This section
will introduce the setting steps and the function parameters of the [PID Operation].
Function Diagram for PID Operation:
Application Solution Example:
[Step Box]:
The Step Box of the [PID Operation] has 5 steps as below. When enabling the Step Box, it
auto enters the first step setting page (The step with a bold underline means it is the
current step.). The user just needs to follow the "Step Box" step by step and then can
complete the project.
101