ICP DAS USA UA-5200 Series User Manual page 220

Step Descriptions:
"Recipient": Choose a name in the field to receive the LINE Notify message. It can be
a LINE user or LINE group (It will auto show the names and groups of the connecting
LINE account. If choose a LINE group, all the members in the LINE group will receive
the message.)
"Message": Set up the message content. It can be English or Chinese, Ex: "外門 test".
The user also can use the default value "Value1: {{Value1}}", it will send the message
content that setting in the "Define Message" field of the UA Web HMI [IFTTT Condition
Trigger > Condition Table]. (The message will list the module name code plus the I/O
variable code as the picture below. Refer
depending on your need.
At last, click "Create action".
It can be English and
Chinese as the left pic.
Or use the default {Value1}
that set in the UA Web HMI
as the right pic.
Recipient: Choose 1 to 1 or Group (as the right picture)
UA-5200 Series User Manual V4.3
Section 9.2). The user can choose one
The default Values can only
be used the {Value1}. The
others Value (2, 3...) are no
used.
220
ICP DAS