ICP DAS USA UA-5200 Series User Manual page 189

When entering the menu [Convert Setting] and the sub-menu [MQTT JSON] > Modbus
RTU or Modbus ASCII (Master), the Modbus RTU/ASCII modules preset in the [Module
Setting] will show up in the Module List. (Refer to Chapter 6 for the Module Setting.)
Convert Setting > MQTT JSON > Modbus RTU (Master) Module List
No.
*Module Name /
Nickname
Connection Name
All Enabled
Edit
Save
Click [Edit] button cauld enter the "Module Content Setting" and "Variable Tale" page:
The module number in the module list (Not editable here)
The module name set in the module list (Not editable here)
Select a group connection name, and then click [Apply].
Check [All Enabled] box to enable all modules in list for
conversion. Default: Uncheck. Check the box of each module
can enable just that module for conversion.
If user wants to enable some I/O channels for conversion, click
[Edit] of that module to enter the "Module Content Setting" and
"Variable Tale" page.
The page number of the module list: Current page / Total pages.
Click < or > to go to the previous or next page.
Click to save the settings of this page.
UA-5200 Series User Manual V4.3
189
ICP DAS