Summary of Contents for ICP DAS USA UA-5200 Series
Page 1
UA-5200 Series Quick Start v1.6, 03/2021 Packing List includes The shipping package this document and the following items: UA-5231 or UA-5231M UA-5231M-3GWA CA-0910 MicroSD Screw Terminal UA-5231M-4GE/4GC Cable Card Driver x 16 M3x6L Screw x 4 GSM Antenna 44mm DIN-Rail Clip x 1...
Page 2
Preparations for Devices Prepare one UA-5200 (Ex: UA-5231), and the following: 1. PC/NB: Can connect to the network and set the network 2. Ethernet Hub or Switch (Ex: NS-205A) 3. Power Supply: +12 ~ +48 VDC (Ex: MDR-60-24) Hardware Connection Connect the UA-5200 with the RJ-45 Ethernet port to an Ethernet hub/switch and PC.
Page 3
Network Connection Factory Default Settings of UA-5200 192.168.255.1 Assign UA-5200 a new IP setting 255.255.0.0 Network Netmask according to your case. 192.168.1.1 Gateway After login, change root Username Web UI the username / Account password to use root Password other functions. Change PC’s IP setting to be in the same network with UA.
Page 4
Change the default Username/Password in the 【System Setting】【Account Setting】 to use other functions. Click 【System Setting】【Time Setting】, check if the UA time is correct. If not, modify or set Time Synchronization. Click【System Setting】【Network Setting】【Network Setting(LAN1)】to change the IP setting by user network. Save the IP setting, restore the PC original IP settings, and type the UA new IP in the browser to login the Web UI of UA- 5200.