Pid - ICP DAS USA UA-5200 Series User Manual

UA-5200 Series User Manual V4.3 ICP DAS

4.3. PID

PID (Proportional-Integral-Derivative) control is the most widely used in industrial control
systems. A regulator which is controlled in accordance with Proportional, Integral and
Derivative is called PID control for short, also called PID regulator. When the user cannot
fully grasp or measure parameters of the control system, the PID regulator is the best
solution.
The PID controller is a common feedback loop component in industrial control applications.
The controller compares the collected data with a reference value and then uses this
difference to calculate a new input value whose purpose is to allow the system data to
reach or remain at the reference value.
This section introduces the setting steps and the function parameters of the PID. There are
2 items about "PID" function in the "Function Wizard". The 2 nd
item [PID Operation + OPC
st
UA Communication Conversion] is combining the 1 item [PID Operation] and the Section
4.1.1 Modbus / OPC UA Conversion .
[Step Box] of [PID Operation] :
[Step Box] of [PID Operation + OPC UA Conversion] :
100