Sensors & Software pulseEKKO Product Manual page 83

Alternatively, you can also change the Language and Country/Region at the bottom of the
screen. Press Back to accept changes and return.
5.1.2 Units
Toggles between US Standard and Metric Units.
5.1.3 Volume
Adjusts the volume of the speaker. This can also be changed by using the
(4.4) anytime the system is not collecting data.
5.1.4 Brightness
Adjusts the brightness of the screen. Note that increasing the brightness consumes more
battery power. This can also be changed by using the
system is not collecting data.
5.1.5 Screen Saver
A screen saver can be setup to turn off the DVL screen after a period of inactivity to save power.
The Screen Saver can be set to turn the screen off after 1 minute, 5 minutes or never (OFF
setting). Pressing this button cycles between those three options. When the screensaver is
activated and the screen shuts off, touch anywhere on the screen to turn it back on again.
Figure 5-4: Setting the Locale
Swipe Down menu
71
Tools and Preferences
Swipe Down menu
(4.4) anytime the