Sensors & Software pulseEKKO Product Manual page 108

Pressing GPS Setup will take you the screen shown in Figure 5-39, where you can also change
the GPS being tested (Internal or External).
•
Format – pressing this toggles between UTM or Latitude/Longitude coordinates
•
GPS Mode – pressing this cycles between using the Internal GPS, the (optional)
External GPS or turning the GPS off. If the External GPS is selected, the screen
displays additional options (Figure 5-40). If the serial port power is On for the External
GPS and you change the GPS mode to Internal or Off, the serial port power will be
turned off as a safety measure.
Figure 5-39: Configuring GPS
Figure 5-40: Configuring options for external GPS
96
Tools and Preferences