Sensors & Software pulseEKKO Product Manual page 44

and handle with Velcro straps. The cable should have some slack to reduce any stress
during data collection, as the handle assembly moves up and down.
When the metal odometer cable is routed overtop of the low frequency antennas, it can
cause banding in the GPR data. Banding can often be removed in post-processing,
however, if possible, we recommend two-person operation so the odometer cable does not
cross the low frequency antennas.
7. Two Person Operation: Route the odometer cable behind the wheel odometer to the
second person carrying the DVL.
Fibre Optic
Cables
Odometer Cable
32
Assembling Full Configurations