Sensors & Software pulseEKKO Product Manual page 114

Figure 5-46: MapView showing two grids and multiple lines with interpretations and flags.
5.3.4 Delete Project
Pressing this will delete the currently selected project. There is a confirmation window asking if
you are sure; press Yes to continue deleting, press No to cancel.
5.3.5 Export Data
Screenshots and data are always saved to the internal memory of the DVL. When a USB drive
(memory stick) is inserted into the USB port on the DVL, a message will appear asking if you
would like to export all data (regardless what screen you are in). If Yes is selected, all data is
copied to the USB stick. If you need to export data again, the USB stick will need to be
removed and reinserted.
If No is selected, the user can enter File Management and export only data from a selected
project. Pressing the Export Data button will copy only the data from the currently selected
project to the USB-drive. If no USB-drive is inserted, this option will not be accessible.
102
Tools and Preferences