Sensors & Software pulseEKKO Product Manual page 139

•
Start Delay – Allows the user to set an initial time delay in seconds, to give time
to get setup and prepared to start the survey line. Use the + and – buttons to set
the desired time.
•
Stop After Trace – Allows the user to define a set number of traces to collect
before the system stops, giving the user an opportunity to make changes or
adjustments, for example. Data collection on this line cannot be continued after
this; a new line must be started. Use the + and – buttons to set the desired
number of traces (Figure 6-22), or it can be set to OFF.
Figure 6-22: Pausing data collection after 10 traces
Figure 6-21: Advanced menu
127
System Configuration