Sensors & Software pulseEKKO Product Manual page 127

System Configuration
Figure 6-9: Selecting the older pulseEKKO 100 Transmitter.
Select None to not fire the transmitter and just listen to the background noise level.
6.1.7 Receiver
This setting allows you to specify which receiver is being used for data collection. Pressing
Receiver will display the screen in Figure 6-10.
Figure 6-10: Selecting the type of Receiver.
The pulseEKKO PRO receiver is the conventional receiver used in the models specified. If this
is the one connected, select this and then press Back.
115