Operating Conditions; Performance - Siemens HydroRanger 200 HMI Operating Instructions Manual

Technical data

11.2 Operating conditions

11.2 Operating conditions
Location
Altitude
Ambient temperature
Relative humidity
Installation category
Pollution degree
11.3

Performance

Accuracy
Resolution
Memory
Range
Temperature compensation
•
Measurement performance under reference operating conditions and configuration.
1
Program range is defined as the empty distance from the face of the transducer [Empty
2
(2.2.4.) (Page 170)] plus any range extension [Range Extension (2.2.7.) (Page 172)].
296
1
1
Source
Indoor/outdoor
2 000 m max.
-20 ... 50 °C (-5 ... 122 °F)
Wall Mount: suitable for outdoors (Type 4X /
•
NEMA 4X, IP65 Enclosure)
Panel Mount: suitable for outdoors (Type 3 /
•
NEMA 3, IP54 Enclosure)
II
4
0.25 % of maximum range or 6 mm (0.24 inch),
whichever is greater.
0.1 % of program range or 2 mm (0.08 inch),
2
whichever is greater.
2 MB static RAM
•
1 MB flash EPROM
•
0.3 m (1 ft) to 15 m (50 ft), dependent on trans-
ducer
Range: -50 to 150 °C (-58 to 302 °F)
Integral transducer sensor
•
TS-3 temperature sensor
•
Programmable fixed temperature
•
Operating Instructions, 06/2018, A5E36281317-AC
HydroRanger 200 HMI