Parameter reference
8.6 Setup (2.)
8.6.2.4
Empty (2.2.4.)
Enters distance, in Units (2.1.1.) (Page 162), from the face of the transducer to the process
empty point.
Index
Values
Alters
Altered by
Related
Setting this value also sets Span (2.2.2.) (Page 169), unless Span was already set to
another value. For distance operation [Sensor Mode (2.1.3) (Page 163) = Distance], Span is
preset to Empty.
①
②
170
Transducer
Range: 0.000 ... 99.000 m [or equivalent, depending on Units (2.1.1.) (Page 162)
]
Preset: 5.000 m [or equivalent, depending on Units (2.1.1. (Page 162)) ]
Span (2.2.2.) (Page 169)
•
Units (2.1.1.) (Page 162)
•
Blanking (2.2.6.) (Page 171)
•
Level (3.2.8.3.) (Page 256)
•
Distance % (3.2.8.4.) (Page 256)
•
Empty
Span
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC