Parameter reference
8.6 Setup (2.)
8.6.7.2
Vessel shape (2.7.2.)
Enters the Vessel Shape value matching the monitored vessel or wet well.
Liquid (material) volume is calculated when Sensor Mode (2.1.3.) (Page 163) = *Level.
Alternatively, the remaining vessel capacity is calculated when Sensor Mode (2.1.3.)
(Page 163) = Space. In RUN mode, readings are displayed in percent of maximum volume.
To convert readings to volumetric units, see Maximum Volume (2.7.3.) (Page 188).
Vessel shape
None
186
Display/description
* NONE
Flat level bottom
Flat ends
Parabolic bottom
Half sphere bottom
Flat sloped bottom
Parabolic ends
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC